Retail Store MSRP: $29.95
*Sales Tax Free!* Sale Price: $23.95
]]> Fri, 14 Nov 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/UNIPROTEC3.html http://www.aftermarketcellular.com/ic/UNIPROTEC2.html
Sku: UNIPROTEC2

• 100% Protection from scratches and dirt.
• Self-healing high tech plastic film.
• 5 Pack, Single plastic film for individuals customizing their cell phone, PDA, iPod, or other device.
• Perfect Substitute for the Palm 3177ww protective film.
• One year warranty by the manufacturer applies.

1. Clean the display with a clean cloth.
2. To avoid holding the film on the adhesive side during assembly, use a short strip of Scotch adhesive tape as a mounting aid.
3. Bring the adhesive tape to the lower area of the film in a manner that leaves about 2 cm of tape protruding over the edge of the film.
4. Now hold the projecting tape and pull the film out about 2 cm from the supporting paper.
5. Bend the portion of the supporting paper that is now free, without touching the adhesive surface of the film.
6. Now adjust and paste the free section of the film carefully and exactly on the lower edge of the display.
7. Pull the rest of the supporting paper out slowly, only if this initial part of the film is pasted exactly on the display, and simultaneously paste the film that is released gradually upon the display.
8. Now carefully remove the scotch tape.
9. Press the film onto the display firmly with a credit card or similar object to remove bubbles and uneven gaps.
10. If gaps or air bubbles remain, these will normally disappear on their own in the next 24 hours. If there are Big bubbles, lift the film up to the edge of the bubble, and then paste it back onto the display afresh.
11. Note: Do not hold the film by applying your fingers to the adhesive side! To remove the film, take it off carefully, slowly, and without using any force. The company will not be liable in case of improper handling or non-observation of the instructions in the user document.

Retail Store MSRP: $19.95
*Sales Tax Free!* Sale Price: $13.95
]]> Tue, 25 Mar 2008 02:04:00 PDT http://www.aftermarketcellular.com/ic/UNIPROTEC2.html http://www.aftermarketcellular.com/ic/NNTN7295.html
Sku: NNTN7295




Motorola/ Nextel NNTN7295 Pedestal Mount combines handsfree safety & convenience for a very small price!
• Pedestal mount connects to a dash or Pedestal.
• Swivel post also glues to the back of all cellular, cell phone, & cordless phone models.
• NNTN7295 replaces NNTN5113. The difference is that the new NNTN7295 DOES NOT INCLUDE swivel belt clip part #SYN8763!
• This Pedestal mount is ideal for keeping cigarette lighter cords untangled, handsfree speakerphone mounting, etc.
• Affordable handsfree mounting solution for car and person.
Just swivel your cell phone out of the way!

Retail Store MSRP: $29.95
*Sales Tax Free!* Sale Price: $20.95
]]> Wed, 12 Mar 2008 02:04:00 PDT http://www.aftermarketcellular.com/ic/NNTN7295.html http://www.aftermarketcellular.com/ic/727-04.html
Sku: 727-04




Panavise Pedestal Mount, 4 inch Slim-line, # 727-4.
• Pedestal mount enhances the convenience of a cell phone hands free device, by giving your car kits, cradles & holders a secure place to rest!
• Panavise Slim-line Mount with Large Knobs means this 4 inch pedestal can easily be adjusted by hand, yet maintains its position!
• Panavise 727-4 Pedestal Mount also positions the car kits, cradles & holders to face directly at the driver for easier visibility!
• Hole pattern of Slim-line mount accommodates installation of all car kits, cradles & holders.
• Fully adjustable at both ends; pivots 210° and rotates 360°.
• Shaft is made of aircraft grade aluminum alloy.
• Mild Steel mounting foot features a Concave design that evenly distributes mounting load for maximum stability, eliminating "carpet float."
• Hands-free unit, car kits, cradles & holders must be purchased separately.

Retail Store MSRP: $19.95
*Sales Tax Free!* Sale Price: $17.95
]]> Thu, 21 Feb 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/727-04.html http://www.aftermarketcellular.com/ic/SBX-819.html
Sku: SBX-819




3-Watt Booster/ Amplifier is CDMA / PCS, DCS / GSM compatible for US Cellular systems operating at 800 mHz. Use with External Antenna for increased coverage.
• Solves poor reception and dropped calls, by amplifying your 0.6 watt cellular phone up to 3 Watts power output in the 800 MHz band!
• 3-watt booster can be used in a vehicle, boat, home or office, resulting in wide area coverage, increased signal strength in weak coverage areas, and substantially fewer dropped calls.
• 3-Watt Booster kit is compatible with Many cellular phones that offer an external antenna connection on the cell phone. Note: Required cellular RF adapter cable, or cellular car kit, sold separately! Not intended for use with 1900 MHz only cell phones, as that frequency band is passed through without amplification.
• Cell Phone Signal Boosters are
  CELLULAR SYSTEM specific to a geographic area! This means that you must Enter your Zip code to determine which radio frequency band they use in your area. 800 MHz band is required for this item to perform.
• The 3 watt booster is powered from any suitable +12 Volt or +24 Volt DC source, pulling only 800 Mah of current.
• Included cigarette lighter plug allows total portability, or use the included wiring to power from a car battery, or any 12 volt power supply for home or office use.
• Lightweight Dimensions are only 3.7" Wide x 1.00" High x 4.80" Long, and only weighs 0.80 Lbs.
• 3-Watt Booster Kit includes a 4 foot RF cable, with TNC connectors for superior antenna connectivity & extended coverage.
• Antennas sold separately.
• Professional installation is suggested when used with Hands free Car Kit.

Retail Store MSRP: $279.99
*Sales Tax Free!* Sale Price: $227.95
]]> Thu, 31 Jan 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/SBX-819.html http://www.aftermarketcellular.com/ic/811214.html
Sku: 811214




SIGNALBOOST amplifier, Dual Band 800 MHz/ 1900 MHz Cellular and PCS network Amplifier/ Booster model 811214 replaces 811211 by Wilson Electronics, and is Plug-and-Play with cigarette lighter plug and 5 db magnet mount antenna. SIGNALBOOST works with all Cellular and PCS cell phones, Data cards and networks.
• No plug-in phone adapter is needed: Connects to ALL cell phones and data cards with either the included cell phone cradle or Velcro device. Simply place your cell phone into the inductance cradle. The cradle has a 6 foot RF cable to connect into the amplifier. Alternately glue one side of the Velcro to the antenna area of the cell phone/ Data card near the internal antenna at the top, and the other Velcro piece has an RF cable leading into the amplifier/ booster.
• Optional cell phone RF adapter cables are recommended whenever possible for superior transmission of signal. Connection on amplifier is an FME male connector. RF adapter needs to end in an FME female connector, many folks use the ACC-6 RF adapter to mate with a TH Bury car kit.
• Wilson Electronics SIGNALBOOST Dual Band amplifier/ booster has
  10 times more power than your cell phone or laptop data card alone. This amplifier improves voice and data signal. 3G technologies often need the signal boost for data communications. This amplifier also reduces battery use on the cell phone.
• 12 volt DC Cigarette Lighter Plug and 12 foot antenna cable are included for an easy self installation.
• 3 watts maximum output: Power control logic ensures maximum output power is within cellular standards, since Gain is cell site controlled.
• Model W-811214 works on all Digital formats of CDMA, TDMA and GSM used in the Americas.
• Note: Not compatible with iDen/ Nextel ESMR networks in the 800-824 MHz band.
• Works great in mobile, in-building and marine applications.
• Specifications: Max RF +35 dBm / +33 dBm. Noise Figure 3.5 dB nominal. Flatness 2 dB / 2 dB. Isolation (uplink/downlink) >50 dB. Power Requirements 12 Volts DC, 2 Amp minimum. Connectors on Amplifier are FME-Male and 50 ohms. Dimensions 5 x 3.5 x 1.2 (inches) / 12.7 x 8.9 x 3 (cm). Weight 1.03 pounds / 0.468 kilograms. Model Number W-811214 operates at both cellular radio frequency bands of 824-894 MHz and 1850-1990 MHz.
Use ACC-6 to mate this amp with any Wilson RF adapter cable.
• FCC and IC type accepted. US and foreign Patents Pending.
• Wilson Electronics factory original One year warranty applies.

Retail Store MSRP: $249.99
*Sales Tax Free!* Sale Price: $209.95
]]> Fri, 11 Jan 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/811214.html http://www.aftermarketcellular.com/ic/BJ1.html
Sku: BJ1




The Original BlackJack FM Hands free Device FM Hands free transmitter is a Portable Zero-Installation Hands free Car Kit Made Easy!
"Your Phone will think it's a Headset, Your Radio will think it's a Station...You will think it's Amazing!"



• Stylish in design, easy to use and with no installation, set-up or pairing requirements, this tiny new product offers the latest in wireless, in-vehicle portable duplex hands free speaker-phone technology.
• Simply plug The Original BlackJack into the Universal 2.5mm headset jack on any Cordless Home, Wireless, cellular, or Wireless PDA Phone and transmit your caller's voice through all of the speakers in your vehicle, or home FM radio speakers.
• Your voice is heard through the Blackjack's Speaker-phone Quality microphone located on the side of the Original Blackjack FM Hands free Device.
• Simple to Use!
  1. Plug it in!
  2. Turn it on!
  3. Tune any FM radio to 88.7 FM, and talk!
• The Original BlackJack FM Radio Device plugs into the 2.5mm headset jack on any cell phone and uses the phones audio in/out for the best in Hands free Sound Quality! Your phone thinks it simply has a headset plugged into it! Therefore the speaker and microphone on the phone turns off, and all audio in and out of your phone stream out of your headset jack, and through the Original Blackjack Hands free Device
• NOW! Play downloaded Music or Ringtones through your Radio or car stereo too! The Original Blackjack is the first and only all-in-one device that allows you to play downloaded music from your MP3-enabled cellular or PDA phone through your car stereo speakers! No longer do you need expensive A2DP phones and adapters to stream your music!
• Bluetooth is NOT required on your phone to be hands free anymore either! Simply plug in & turn on the BlackJack, tune your FM radio to 88.7 FM, adjust your phone's volume, then your stereo's volume and place your phone call! It's just that easy!!! You can turn your radio very loud until any feedback ever happens, that's something no other car kit can do!
• The Original BlackJack is Lightweight at only 1/2 ounce (14 grams) & Very Small in size (1" x 1.9" x 0.5").
• The BlackJack Hands free Device features a Built-In Antenna with an operating transmission range of up to 30 Feet!
• This Unique Hands free device is Powered by a Replaceable CR2032 Lithium Ion Battery (Included) with a Talk Time of up to 50 Hours.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including radio interference that may cause undesired operation.
• Click Here for 2.5 mm Headset compatible cellular phones.
• Blackjack Factory Original 90 Day Warranty Applies. Before contacting customer support at sales@blackjackhandsfree.com, check Blackjack support pages. If your problem is still not resolved, call technical support at 1-866-BLACKJA. If at that point you still require a replacement, Blackjack support team will provide instructions for sending back your unit for replacement.

Retail Store MSRP: $59.99
*Sales Tax Free!* Sale Price: $38.95
]]> Tue, 25 Sep 2007 02:03:00 PDT http://www.aftermarketcellular.com/ic/BJ1.html http://www.aftermarketcellular.com/ic/YX300.html
Sku: YX300




Zboost YX300 Personal Wireless Repeater by Wi-Ex increases performance Economically, and effectively for your personal work space or small use area.
zBoost cell extender YX300 review by G4TV is here.
• Increased performance is now affordable: zBoost, zPersonal (zP), extends a Cell Zone at your workspace (4-6 foot range).
• Portable Wireless Repeater: For a single user in dorms, hotels, homes or offices, the zBoost YX300's compact size and no set-up make it ideal for traveling. Whether you're at a hotel, meeting room, or dorm, the zBoost YX300 is guaranteed to boost your bars by creating your very own "Cell Zone". It's also relatively small at 5.0 by 3.8 by 1.18 inches, and with its lightweight, but sturdy, plastic shell it weighs only 7.36 ounces.
• Complete: Antenna, Base unit, AC Power adapter are all included.
• Plug-n-Play: Two suction cups on the back of the zBoost YX300's base allow you to secure it firmly to a flat surface, even a window. But before that, you'll have to use your cell phone to find a location in your Hotel, home or office that gets a measurable signal. At least one bar will work, but ideally you should find the best signal you can. Keep in mind that the YX300 needs to receive a cellular signal in order to boost it (it doesn't create signals on its own), so if you can't get a signal anywhere in a building, then this product is not for you.
• Antenna Range up to 6 feet: Attach the plastic boosting antenna to the base via the screw connector. Fortunately, the wire for the antenna measures 19 feet, so you have a lot of freedom as to where you can position everything. It's best to locate it near the center of the room to create a wide boosting area, as the zBoost YX300's range is only four to six feet from the antenna. The antenna also has two suction cups so you can attach it a variety of places.
• Dual Band: This means that you can use this Repeater/ Booster unit to repeat/ boost ALL cellular and PCS frequencies, on all networks, except the ESMR radio frequency band used for Nextel, SouthernLinc, ClearNet, & Boost, which use the 3WATTBOOSTER3 3 watt Amplifier.
• CNet rated 8/10: Click here for the CNet rating of the zBoost YX300 personal cell repeater.
• One year warranty applies through the manufacturer, at 800-871-1612.

Retail Store MSRP: $169.99
*Sales Tax Free!* Sale Price: $151.95
]]> Thu, 20 Sep 2007 02:03:00 PDT http://www.aftermarketcellular.com/ic/YX300.html http://www.aftermarketcellular.com/ic/UNIMOUNT2.html
Sku: UNIMOUNT2




Safely mount your cell phone on the dash of your car!
• Elevating your cellular phone mount to a higher eye level keeps your viewing closer to the road!
• Dash-mount/ Pedestal-mount cell phone holder is perfect for handsfree headset or speakerphone use!
• Primary Pedestal mount quickly screws onto your car trim, dashboard, or console.
• This universal mount with holder includes a quick release button for added convenience.
• Ratchet type holder has firm, cushioned grips to fit any width of cell phone up to 2.5 inches wide.
• Also has a cushioned foam back & plastic bottom support to gently cradle you cellular phone.
Quick Mount cell phone holder is safe & convenient!

Retail Store MSRP: $19.99
*Sales Tax Free!* Sale Price: $9.95
]]> Sat, 19 May 2007 02:03:00 PDT http://www.aftermarketcellular.com/ic/UNIMOUNT2.html http://www.aftermarketcellular.com/ic/727-06.html
Sku: 727-06




Panavise Pedestal Mount, 6 inch Slim-line, # 727-06.
• Pedestal mount enhances the convenience of a cell phone hands free device, by giving your car kits, cradles & holders a secure place to rest!
• Panavise Slim-line Mount with Large Knobs means this 6 inch pedestal can easily be adjusted by hand, yet maintains its position!
• Panavise 727-06 Pedestal Mount also positions the car kits, cradles & holders to face directly at the driver for easier visibility!
• Hole pattern of Slim-line mount accommodates installation of all car kits, cradles & holders.
• Fully adjustable at both ends; pivots 210° and rotates 360°.
• Shaft is made of aircraft grade aluminum alloy.
• Mild Steel mounting foot features a Concave design that evenly distributes mounting load for maximum stability, eliminating "carpet float."
• Hands-free unit, car kits, cradles & holders must be purchased separately.

Retail Store MSRP: $29.95
*Sales Tax Free!* Sale Price: $22.95
]]> Sat, 10 Mar 2007 02:02:00 PST http://www.aftermarketcellular.com/ic/727-06.html http://www.aftermarketcellular.com/ic/YX510.html
Sku: YX510




zBoost Wireless Signal Booster, YX510-Dual band Wireless repeater, Multiple Cell Phone Repeater Antenna is a great way to improve cell phone connectivity WIRELESSLY!
• 2,500 sf coverage area: The YX510-Dual band wireless repeater is a Bi-Directional Amplifier (BDA), designed for consumers, for single or multiple cell phone users in homes or offices up to a maximum 2,500 square foot area when unobstructed. Dual-Band design covers all phones except Nextel iDen types.
• Handles all PCS or CELLULAR digital & analog protocols, and includes multiple patent pending technologies to provide low-cost coverage while continually adapting to signals to prevent interference and remain transparent to the wireless network.
• Provides a visual indicator if the antenna is positioned improperly, but will NOT suffer damage or interfere with the Carrier Network.


BENEFITS for the Cell Phone Repeater Antenna and Signal Booster User:


• Stay wireless on your cell phone! No cradle or connections!
• Truly affordable in a complete cell phone repeater antenna and signal booster kit.
• YX510-Dual band wireless repeater is Easy to install & Simple to use.
• Maximize cell phone data speed and reduce battery consumption!
• Small and aesthetically pleasing base unit covers 1,000 – 2,500 sq.ft.
• Optional High performance antennas can be added to the system to increase range. Uses a TNC female connector on the base, and a TNC female connector on the outside antenna connector.
• YX510 Kit includes the amplifier Base Unit, 110-120 volt AC power supply, Base Unit Antenna (-3 dbi), 35 feet of low-loss SATV coaxial cable (RG6), the outside Signal Antenna, and mounting hardware. The omni-directional antennas are easy to orient vertically to receive radio signal from multiple cell towers.
• Wi-Ex Cell Phone Repeater Antenna and zBoost Signal Booster are
  CELLULAR SYSTEM specific! This means that you cannot use iDen systems (Nextel, Boost, Southern Linc, ClearNET) which cannot use these repeaters!
• This YX510-Dual band Cell Phone Repeater works in BOTH the 800 MHz and 1900 MHz bands, used by ALL cellular networks.
• Note: If you can place a cell phone call outside your home or office near where the outside antenna will be placed, the YX510 Cell Phone Repeater unit will help you by boosting the signal inside the building. If you can place a call outside, but the signal is weak,(1 bar or less on your cell phone), consider an optional high-performance antenna. If there is no signal outside, this Cell Phone Repeater cannot give you any improvement in coverage. Once the unit is installed, no returns are accepted.
• Package includes everything you need, amplifier base unit, power supply, base unit antenna, low-loss SATV coaxial cable (RG-6), signal antenna and mounting hardware. The omni-directional antennas are easy to orient and receive from multiple cell towers.
• One year warranty applies through the manufacturer, at 800-871-1612. No returns on opened or installed units, so be sure you have signal outside first.

Retail Store MSRP: $399.99
*Sales Tax Free!* Sale Price: $337.95
]]> Tue, 27 Feb 2007 02:03:00 PST http://www.aftermarketcellular.com/ic/YX510.html http://www.aftermarketcellular.com/ic/UNIBC2.html
Sku: UNIBC2




Universal swivel belt clip combines safety & convenience for a very small price!
• Universal swivel belt clip works on all cell phone models!
• 3M adhesive mounted swivel post quickly adheres to a clean surface such as the back of your cell phone or cordless phone.
• Universal swivel belt clip FEATURES a heavily reinforced belt clip that really stays on your belt!
• Push button on top of the belt clip allows easy release with just one hand.
• Two swivel posts are provided. The swivel posts use a 3M adhesive to glue to the back of the cell phone.
• Please note: This universal belt clip cannot be used to replace the existing belt clip that attaches to the Nextel holster posts. Works with most cell phone accessories, but not car kits.
• Swivel action helps keep your phone handy and adjustable to car seats, chairs, & other obstacles.
Just swivel your cell phone out of the way with your Universal swivel belt clip!

Retail Store MSRP: $19.95
*Sales Tax Free!* Sale Price: $9.95
]]> Thu, 22 Feb 2007 02:02:00 PST http://www.aftermarketcellular.com/ic/UNIBC2.html http://www.aftermarketcellular.com/ic/Y-ADAPTER3.html
Sku: Y-ADAPTER3




Triple Cigarette Lighter Socket Power Adapter.
• Car cigarette lighter plug has Three (3) CLA sockets to power 3 cigarette lighter adapter operated devices at once!
• 3-outlet 12 volt DC adapter powers three devices from one cigarette lighter outlet.
• Perfect for battery charging your cell phone, while using your other portable electronics!
• Solid body of this triple socket CLA adapter allows you to clear many ash-trays.
• Just plug in the tri-port adapter for 3 sockets of power & play!
• Our one year warranty is much faster & easier if you should ever need it!

Retail Store MSRP: $9.99
*Sales Tax Free!* Sale Price: $7.95
]]> Tue, 20 Feb 2007 02:03:00 PST http://www.aftermarketcellular.com/ic/Y-ADAPTER3.html http://www.aftermarketcellular.com/ic/UNIMOUNT3.html
Sku: UNIMOUNT3




Safely mount your cell phone on the windshield of your car!
• Elevating your cellular phone mount to a higher eye level keeps your viewing closer to the road!
• Windshield-mount cell phone holder is perfect for hands free headset or speakerphone use!
• Primary Suction cup mount quickly sticks onto your car windshield with the flip of the lever.
• This universal mount with holder includes a cell phone quick release button for added convenience.
• Ratchet type holder has firm, cushioned grips to fit any width of cell phone up to 2.5 inches wide.
• Also has a cushioned foam back & plastic bottom support to gently cradle you cellular phone.
Quick Windshield-Mount cell phone holder is safe & convenient!

Retail Store MSRP: $19.99
*Sales Tax Free!* Sale Price: $13.95
]]> Sat, 27 Jan 2007 02:04:00 PST http://www.aftermarketcellular.com/ic/UNIMOUNT3.html http://www.aftermarketcellular.com/ic/DISPLEX.html
Sku: DISPLEX




DISPLEX Scratch Remover/ Lens polish/ Display polish is Perfect for all cell phones, PDA, & plastic screens!
• The problem: Mobile telephone displays will scratch very easily, appearing shabby and unsightly. Only a few manufacturers offer replacement displays and even then the exchange is usually very costly.
• The solution: DISPLEX offers a simple solution for this widespread customer problem. With this new type of special polishing paste, end users have for the first time the possibility of eliminating the scratches in their mobile phone displays quickly and cost-effectively in a do-it-yourself process.
• The use: Apply some DISPLEX to the cell phone display. Polish the scratched areas with heavy pressure for 2-3 minutes with a soft, clean cotton cloth. Repeat application as necessary for deep scratches. Remove residue. Attention: do not polish coated surfaces. Treat the transparent part of the display lens exclusively. Contents of the 5 gram tube is sufficient for approximately 8-10 applications.
• The method of operation: The plastic lens is lightly dissolved and polished with fine abrasive particles. The corners of the scratch traces are rounded off and the fissure bottom filled out with the material of the lens itself.
• No returns on opened product.

Retail Store MSRP: $19.95
*Sales Tax Free!* Sale Price: $12.95
]]> Sat, 13 Jan 2007 02:03:00 PST http://www.aftermarketcellular.com/ic/DISPLEX.html