• Solves poor reception and dropped calls, by amplifying your 0.6 watt cellular phone up to 3 Watts power output in the 800 MHz band!
• 3-watt booster can be used in a vehicle, boat, home or office, resulting in wide area coverage, increased signal strength in weak coverage areas, and substantially fewer dropped calls.
• 3-Watt Booster kit is compatible with Many cellular phones that offer an external antenna connection on the cell phone. Note: Required cellular RF adapter cable, or cellular car kit, sold separately! Not intended for use with 1900 MHz only cell phones, as that frequency band is passed through without amplification.
• Cell Phone Signal Boosters are
  CELLULAR SYSTEM specific to a geographic area! This means that you must Enter your Zip code to determine which radio frequency band they use in your area. 800 MHz band is required for this item to perform.
• The 3 watt booster is powered from any suitable +12 Volt or +24 Volt DC source, pulling only 800 Mah of current.
• Included cigarette lighter plug allows total portability, or use the included wiring to power from a car battery, or any 12 volt power supply for home or office use.
• Lightweight Dimensions are only 3.7" Wide x 1.00" High x 4.80" Long, and only weighs 0.80 Lbs.
• 3-Watt Booster Kit includes a 4 foot RF cable, with TNC connectors for superior antenna connectivity & extended coverage.
• Antennas sold separately.
• Professional installation is suggested when used with Hands free Car Kit.

Retail Store MSRP: $279.99
*Sales Tax Free!* Sale Price: $227.95
]]> Thu, 31 Jan 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/SBX-819.html http://www.aftermarketcellular.com/ic/811214.html
Sku: 811214

• No plug-in phone adapter is needed: Connects to ALL cell phones and data cards with either the included cell phone cradle or Velcro device. Simply place your cell phone into the inductance cradle. The cradle has a 6 foot RF cable to connect into the amplifier. Alternately glue one side of the Velcro to the antenna area of the cell phone/ Data card near the internal antenna at the top, and the other Velcro piece has an RF cable leading into the amplifier/ booster.
• Optional cell phone RF adapter cables are recommended whenever possible for superior transmission of signal. Connection on amplifier is an FME male connector. RF adapter needs to end in an FME female connector, many folks use the ACC-6 RF adapter to mate with a TH Bury car kit.
• Wilson Electronics SIGNALBOOST Dual Band amplifier/ booster has
  10 times more power than your cell phone or laptop data card alone. This amplifier improves voice and data signal. 3G technologies often need the signal boost for data communications. This amplifier also reduces battery use on the cell phone.
• 12 volt DC Cigarette Lighter Plug and 12 foot antenna cable are included for an easy self installation.
• 3 watts maximum output: Power control logic ensures maximum output power is within cellular standards, since Gain is cell site controlled.
• Model W-811214 works on all Digital formats of CDMA, TDMA and GSM used in the Americas.
• Note: Not compatible with iDen/ Nextel ESMR networks in the 800-824 MHz band.
• Works great in mobile, in-building and marine applications.
• Specifications: Max RF +35 dBm / +33 dBm. Noise Figure 3.5 dB nominal. Flatness 2 dB / 2 dB. Isolation (uplink/downlink) >50 dB. Power Requirements 12 Volts DC, 2 Amp minimum. Connectors on Amplifier are FME-Male and 50 ohms. Dimensions 5 x 3.5 x 1.2 (inches) / 12.7 x 8.9 x 3 (cm). Weight 1.03 pounds / 0.468 kilograms. Model Number W-811214 operates at both cellular radio frequency bands of 824-894 MHz and 1850-1990 MHz.
Use ACC-6 to mate this amp with any Wilson RF adapter cable.
• FCC and IC type accepted. US and foreign Patents Pending.
• Wilson Electronics factory original One year warranty applies.

Retail Store MSRP: $249.99
*Sales Tax Free!* Sale Price: $209.95
]]> Fri, 11 Jan 2008 02:04:00 PST http://www.aftermarketcellular.com/ic/811214.html http://www.aftermarketcellular.com/ic/YX300.html
Sku: YX300

• Increased performance is now affordable: zBoost, zPersonal (zP), extends a Cell Zone at your workspace (4-6 foot range).
• Portable Wireless Repeater: For a single user in dorms, hotels, homes or offices, the zBoost YX300's compact size and no set-up make it ideal for traveling. Whether you're at a hotel, meeting room, or dorm, the zBoost YX300 is guaranteed to boost your bars by creating your very own "Cell Zone". It's also relatively small at 5.0 by 3.8 by 1.18 inches, and with its lightweight, but sturdy, plastic shell it weighs only 7.36 ounces.
• Complete: Antenna, Base unit, AC Power adapter are all included.
• Plug-n-Play: Two suction cups on the back of the zBoost YX300's base allow you to secure it firmly to a flat surface, even a window. But before that, you'll have to use your cell phone to find a location in your Hotel, home or office that gets a measurable signal. At least one bar will work, but ideally you should find the best signal you can. Keep in mind that the YX300 needs to receive a cellular signal in order to boost it (it doesn't create signals on its own), so if you can't get a signal anywhere in a building, then this product is not for you.
• Antenna Range up to 6 feet: Attach the plastic boosting antenna to the base via the screw connector. Fortunately, the wire for the antenna measures 19 feet, so you have a lot of freedom as to where you can position everything. It's best to locate it near the center of the room to create a wide boosting area, as the zBoost YX300's range is only four to six feet from the antenna. The antenna also has two suction cups so you can attach it a variety of places.
• Dual Band: This means that you can use this Repeater/ Booster unit to repeat/ boost ALL cellular and PCS frequencies, on all networks, except the ESMR radio frequency band used for Nextel, SouthernLinc, ClearNet, & Boost, which use the 3WATTBOOSTER3 3 watt Amplifier.
• CNet rated 8/10: Click here for the CNet rating of the zBoost YX300 personal cell repeater.
• One year warranty applies through the manufacturer, at 800-871-1612.

Retail Store MSRP: $169.99
*Sales Tax Free!* Sale Price: $151.95
]]> Thu, 20 Sep 2007 02:03:00 PDT http://www.aftermarketcellular.com/ic/YX300.html http://www.aftermarketcellular.com/ic/YX510.html
Sku: YX510

• 2,500 sf coverage area: The YX510-Dual band wireless repeater is a Bi-Directional Amplifier (BDA), designed for consumers, for single or multiple cell phone users in homes or offices up to a maximum 2,500 square foot area when unobstructed. Dual-Band design covers all phones except Nextel iDen types.
• Handles all PCS or CELLULAR digital & analog protocols, and includes multiple patent pending technologies to provide low-cost coverage while continually adapting to signals to prevent interference and remain transparent to the wireless network.
• Provides a visual indicator if the antenna is positioned improperly, but will NOT suffer damage or interfere with the Carrier Network.


BENEFITS for the Cell Phone Repeater Antenna and Signal Booster User:


• Stay wireless on your cell phone! No cradle or connections!
• Truly affordable in a complete cell phone repeater antenna and signal booster kit.
• YX510-Dual band wireless repeater is Easy to install & Simple to use.
• Maximize cell phone data speed and reduce battery consumption!
• Small and aesthetically pleasing base unit covers 1,000 – 2,500 sq.ft.
• Optional High performance antennas can be added to the system to increase range. Uses a TNC female connector on the base, and a TNC female connector on the outside antenna connector.
• YX510 Kit includes the amplifier Base Unit, 110-120 volt AC power supply, Base Unit Antenna (-3 dbi), 35 feet of low-loss SATV coaxial cable (RG6), the outside Signal Antenna, and mounting hardware. The omni-directional antennas are easy to orient vertically to receive radio signal from multiple cell towers.
• Wi-Ex Cell Phone Repeater Antenna and zBoost Signal Booster are
  CELLULAR SYSTEM specific! This means that you cannot use iDen systems (Nextel, Boost, Southern Linc, ClearNET) which cannot use these repeaters!
• This YX510-Dual band Cell Phone Repeater works in BOTH the 800 MHz and 1900 MHz bands, used by ALL cellular networks.
• Note: If you can place a cell phone call outside your home or office near where the outside antenna will be placed, the YX510 Cell Phone Repeater unit will help you by boosting the signal inside the building. If you can place a call outside, but the signal is weak,(1 bar or less on your cell phone), consider an optional high-performance antenna. If there is no signal outside, this Cell Phone Repeater cannot give you any improvement in coverage. Once the unit is installed, no returns are accepted.
• Package includes everything you need, amplifier base unit, power supply, base unit antenna, low-loss SATV coaxial cable (RG-6), signal antenna and mounting hardware. The omni-directional antennas are easy to orient and receive from multiple cell towers.
• One year warranty applies through the manufacturer, at 800-871-1612. No returns on opened or installed units, so be sure you have signal outside first.

Retail Store MSRP: $399.99
*Sales Tax Free!* Sale Price: $337.95
]]> Tue, 27 Feb 2007 02:03:00 PST http://www.aftermarketcellular.com/ic/YX510.html